Call forwarding setup guide
You do not have to change the phone number printed on your storefront, Google Business Profile, or flyers. Keep your existing number and forward unanswered, busy, or all calls to your EvaSay virtual number (or connected carrier number).
Before you start
- Make sure you have an active phone number under Dashboard → Phone Numbers and an active published agent assigned to it.
- Write down your EvaSay destination number in 10-digit form (for example,
4155550199) and full E.164 form (for example, +14155550199).
- Dial the setup codes below from your shop's own phone (the phone whose calls you want to forward), not from another phone.
Important note on concurrent calls: When you forward calls from your existing phone line, how many callers can be forwarded at the same time is determined by your own phone carrier or phone system (typically 1–2 simultaneous calls on a standard cell phone or landline; higher on VoIP business phone systems). Your EvaSay plan's advertised concurrent call limit applies to EvaSay Browser Web Calls, not carrier call forwarding.
Choose a forwarding mode
| Mode | How it works | Best for |
|---|
| Conditional (Busy / No Answer / Unreachable) | Your shop phone rings first. If you are on another call, do not pick up, or have no signal, the call goes to EvaSay AI. | Shops where staff answer when free and want AI to catch every missed call. |
| Forward All Calls (Unconditional) | Every incoming call goes straight to EvaSay AI immediately without ringing your handset. | After-hours coverage, busy peaks, or 100% AI reception. |
Quick reference by carrier
Replace 4155550199 with your 10-digit EvaSay number (or +14155550199 for international GSM format).
| Carrier / Phone System | Forward Missed or Busy | Forward All Calls | Turn Off Forwarding |
|---|
| Verizon (US Wireless) | *714155550199 | *724155550199 | *73 |
| AT&T (US Wireless) | *61*4155550199#, *67*4155550199#, *62*4155550199# | *21*4155550199# | ##004# or #21# |
| T-Mobile / Metro (US) | **61*14155550199#, **67*14155550199#, **62*14155550199# | **21*14155550199# | ##004# or ##21# |
| US Landline / Cable | *90 (busy), *92 (no answer) | *72 + number | *73 / *91 / *93 |
| Canada (Rogers / Bell / Telus) | **61*+14155550199#, **67*+14155550199#, **62*+14155550199# | *72 or **21*+14155550199# | ##004# or *73 |
| International GSM | **61*+E164#, **67*+E164#, **62*+E164# | **21*+E164# | ##004# or ##21# |
Verizon (US Wireless & Business)
- Open the Phone dialer on your Verizon phone.
- Forward only missed or busy calls (recommended): Dial
*71 followed by your 10-digit EvaSay number and press Call:
*714155550199
- Wait for the confirmation tone or announcement, then hang up.
- Forward all calls immediately: Dial
*72 followed by your 10-digit EvaSay number and press Call:
*724155550199
- Turn off forwarding: Dial
*73 and press Call.
If star codes fail on a Verizon Business account, sign in to My Verizon → Manage Device → Call Forwarding and enter your EvaSay number there.
AT&T (US Wireless & Business)
- Open the Phone dialer on your AT&T phone.
- Forward missed, busy, and unreachable calls (recommended): Dial each of the three codes below one at a time, pressing Call after each and waiting for the confirmation message:
*61*4155550199#
*67*4155550199#
*62*4155550199#
- Forward all calls immediately: Dial
*21*4155550199# and press Call (or toggle Settings → Phone → Call Forwarding on iPhone).
- Check status: Dial
*#61# and press Call.
- Turn off forwarding: Dial
##004# (clears conditional forwarding) or #21# (clears forward-all) and press Call.
On some AT&T plans, adding ** instead of * (for example **61*+14155550199#) works when single * returns an error. On AT&T Prepaid, conditional forwarding may need to be enabled by AT&T support.
T-Mobile and Metro by T-Mobile (US)
- Open the Phone dialer on your T-Mobile phone.
- Forward missed, busy, and unreachable calls (recommended): Dial each code below with
1 before the 10-digit EvaSay number, pressing Call after each:
**61*14155550199#
**67*14155550199#
**62*14155550199#
- Forward all calls immediately: Dial
**21*14155550199# and press Call.
- Check status: Dial
*#61# and press Call.
- Turn off forwarding: Dial
##004# (all conditional rules) or ##21# (all calls) and press Call.
US Landlines and Business Cable Phone
This applies to Comcast Xfinity Business, Spectrum Business, Cox Business, Frontier, and AT&T Landline.
- Forward all calls from the desk phone: Lift the handset, dial
*72, wait for the dial tone, dial your 10-digit EvaSay number (include 1 if required for long distance), and wait for the confirmation tone.
- Forward busy or unanswered calls (when supported by your plan):
- Busy: dial
*90 + your 10-digit EvaSay number.
- No answer: dial
*92 + your 10-digit EvaSay number.
- Turn off forwarding: Dial
*73 (all calls), *91 (busy), or *93 (no answer).
- Via web portal (recommended for business cable lines):
- Comcast / Xfinity Business: Business Portal → Voice → Call Forwarding (set Call Forwarding Always, Busy, or No Answer).
- Spectrum Business: SpectrumBusiness.net → Voice → Features → Call Forwarding.
- Cox Business: MyAccount → VoiceManager → Call Forwarding.
Canada Carriers (Rogers, Bell, Telus, Fido, Koodo, Virgin Plus)
- Conditional forwarding (recommended): Most Canadian GSM wireless networks accept standard GSM codes:
**61*+14155550199#
**67*+14155550199#
**62*+14155550199#
- Landline / Bell / Telus wireline: Dial
*90 (busy) or *92 (no answer) followed by the 10-digit EvaSay number; dial *91 or *93 to cancel.
- Forward all calls: Dial
*72 + 10-digit number (or **21*+14155550199# on GSM wireless).
- Turn off forwarding: Dial
##004# (wireless) or *73 (landline).
VoIP and Cloud Business Phone Systems
Cloud phone systems do not use star codes—configure forwarding directly in your admin portal. VoIP systems also typically allow more simultaneous forwarded calls than a single cell line.
- RingCentral: Admin Portal → Users → Call Handling & Forwarding → add your EvaSay number as a forwarding destination (set rings before forwarding, or set After-Hours rules).
- Google Voice: Google Voice Settings → Calls → Call forwarding → add and verify your EvaSay number, or set a custom rule in Custom call forwarding.
- OpenPhone (Quo): Settings → Phone Numbers → Call Flow → under Unanswered calls or After business hours, select Forward to phone number and enter your EvaSay number.
- Grasshopper: Settings → Call Forwarding Settings → Extensions → add your EvaSay number and set ring order or schedule.
- Nextiva / Dialpad / Vonage Business: Open your main line or auto-attendant Call Routing / Forwarding settings and set the No Answer, Busy, or After Hours target to your EvaSay number.
iPhone, Android, and International GSM Phones
- iPhone (Forward All Calls): Open Settings → Phone → Call Forwarding, switch it on, and enter your EvaSay number in E.164 format (for example
+14155550199). For conditional forwarding (only when busy or unanswered), use your carrier's dial codes above.
- Android (Conditional & All Calls): Open the Phone app → ⋮ Menu → Settings → Calling accounts (or Supplementary services) → Call forwarding. Choose Always forward, When busy, When unanswered, or When unreachable, and enter your EvaSay number.
- Universal GSM dial codes (outside North America): Replace
+447700900123 with your connected EvaSay number in full international format:
**61*+447700900123#
**67*+447700900123#
**62*+447700900123#
Check status with *#61# and cancel all conditional forwarding with ##004#.
Test and troubleshoot
- Test from a second phone: Call your shop's original number from another phone. Decline the call or let it ring out—within a few seconds your EvaSay AI agent should answer. Check Dashboard → Calls to verify the transcript and recording.
- Carrier voicemail answers before AI: Your carrier's voicemail ring timer may be shorter than the forwarding timer. On GSM carriers you can set a shorter ring time before forwarding (for example
**61*+14155550199**15# for 15 seconds), or ask your carrier to increase voicemail ring time.
- Star code shows "Connection problem or invalid MMI code": Temporarily turn off Wi-Fi Calling while dialing the code (then turn it back on afterward), or use your carrier's mobile app / web portal.
- Prepaid plans: Some prepaid cellular plans disable conditional call forwarding by default; contact your carrier's chat support and ask them to enable Conditional Call Forwarding.
- Want high concurrency without carrier limits? Print your agent's Browser Web Call QR code from Agent → Promote—customers scan and talk directly in their browser with your full EvaSay plan concurrency.